Sorry to post this, but I can't get a clear reply path to Lydia...
Re: the aforementioned clunking...does the hub move with the wheel when you
rotate
the RR wheel? You may be able to tell by watching the brake drum. If the
hub/drum _IS_ moving with the wheel, the problem would seem to lie inside the
rear axle assembly. If the the hub _IS NOT_ moving with the wheel, I would
suspect the splines. Did you tighten the hub nut to spec? Was the wheel fully
seated in the splines when you were tightening down the knock-off?
Either way, you should be able to handle things on your own with a modicum of
tools
or head to a mechanic to either repair the axle ass'y or the hub itself. I'd
bet
on the hub/splines being the problem.
ed
|