Larry,
There are a lot of different opinions on this subject.
For the window glass to the channel I ended up using 3M Windshield adhesive.
I have also used it to hold on the black trim pieces on the car.
For the skin since I have had to remove two that were bonded an epoxy that
was extremely hard to remove. They also recommend and epoxy were the gun to
apply it cost around $150. I ended up using polyurethane. This can expand
and contract with the change in tempreture, but it is also fairly easy to
remove if needed.
I have had no issues with either application.
Greg 0036
_______________________________________________
Bricklin@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|