bricklin
[Top] [All Lists]

Re: [Bricklin] Engine Problem Running Correctly

To: Bricklin@autox.team.net
Subject: Re: [Bricklin] Engine Problem Running Correctly
From: "John T. Blair" <jblair1948@cox.net>
Date: Sat, 29 May 2010 07:45:53 -0400
At 01:58 AM 5/29/2010, Greg Schroeder wrote:

 >I believe I have found the problem.  Checked the compression with my thumb
 >over the spark plug hole and found one cylinder that I could feel 
the vacuum on
 >the intake, but nothing on the compression stroke back up.  I 
decided to pull the
 >head and after a few hours had the head off and there is a bent intake valve
 >that could never close.  So now to find a replacement valve and 
either fix it or
 >have it replaced at the machine shop where I had the engine machining done.

Greg,

Glad to hear you found the problem!!!  Sorry to hear it's a bent valve.   I was
hoping for a much simpler solution. :)

But I've been there with my Morgan.  Although it wasn't a bend valve, it was
a stuck one.  Was able to free it up without pulling the head.

John

John T. Blair  WA4OHZ     email:  jblair1948@cox.net
Va. Beach, Va
Phone:  (757) 495-8229

           48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
      75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                        65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________
Bricklin@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>