Rick,
Thanks for the information in the other email. I have some checking to do.
As far as the filter this is the second reference I have heard about not
using a Fram filter. I am using a WIX basically since I like the look of
the black under the hood, but at the time for no other reason. Sounds like
Fram should be avoided.
Greg 0036
----- Original Message -----
From: "Rick at High Tech Coatings" <rick@hightechcoatings.com>
To: "bl" <bricklin@autox.team.net>
Sent: Sunday, August 30, 2009 4:21 AM
Subject: Re: [Bricklin] Oil Pressure Issue
> I'm not sure the filter you are using but if it is a fram I would start by
> changing it to a wix or napa filter first. I'm not sure if there is a
> bypass
> in the remote housing but if there is it should be eliminated as that may
> be
> your issue. first and easiest check is the filter!
>
> On 8/29/2009 7:36:07 PM, Greg Schroeder (gschroeder@comcast.net) wrote:
>> I had an issue with the oil pressure gauge when I was getting ready to
>> leave
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Bricklin@autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as gschroeder@comcast.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|