All distributers point to the number one plug when you are setting the
distributer on an engine. The number 1 cylinder should be at top dead center
in order for this to work correctly. Below is a link showing the firing
order and cylinder locations of the Windsor class engines if anyone wants it
for reference.
http://www.302w.com/Firing-order.aspx
Hope this helps.. Dennis
----- Original Message -----
From: "D Walker" <treefrogno9@webtv.net>
To: "Rick at High Tech Coatings" <rick@hightechcoatings.com>; "bl"
<bricklin@autox.team.net>
Sent: Tuesday, July 21, 2009 6:37 AM
Subject: Re: [Bricklin] Distributor Position at TDC
> Looking at it from the front. The advance can should be somewere near
> 5:00. Your no.1 will be the first plug wire location right of the front
> cap mounting screw.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Bricklin@autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as drgautreau@comcast.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|