bricklin
[Top] [All Lists]

Re: overheating 2121

To: <bricklin@autox.team.net>
Subject: Re: overheating 2121
From: "Just Me" <lvphotogroup@cox.net>
Date: Sat, 16 Aug 2008 15:11:39 -0700
--------------------------------------------------------------------------------

An often overlook cause of radiator problems can be traced to trapped air in 
the cylinder heads.

Areas inside the engine that the air pocket contacts are insulated from the 
cooling effects of the radiator coolant,

meaning less heat is carried away to the outside. What happens is that when 
the temperature of the uncooled

area gets higher than the boiling point of the coolant, steam is created.


Air pockets can form when the cooling system is being refilled after a 
coolant change.

The trapped air may also prevent your new thermostat from opening and cause 
the engine to overheat.

The problem here is that it may lead to additional damage such as head 
cracking or warping.

Another symptom of air trapped in the cooling system would be little or no 
heat output from the heater when the engine is warm.

After your motor has warmed up, turn on the heater and see if this happens.
Also, your timing problems may well be heat related.


Unfortunately, cooling problem fixes, like those of fuel, 
ignition/electrical, drive train etc, have to be isolated one item at a 
time.



If there is not any air pockets, it sounds like the cooling system is 
working correctly. If I were to hazard a guess, I would focus my attention 
at it being a timing problem and/or

the oil not being cooled. Besides providing lubrication, the oil also pulls 
heat from the engine. It may be time to overhaul the engine.  If there is an 
oil blockage, it can not effectively lubricate, which will produce more heat 
due to friction and the inability to remove the heat.



Larry in LV

#2046




<Prev in Thread] Current Thread [Next in Thread>