I'm not sure. I've never messed with the proportioning valve when
bleeding brakes.
Stephen I. Early
Card Services Technology
Bank of America Corporation
800.441.7048 x74788
stephen.early@fiacardservices.com
-----Original Message-----
From: Greg Schroeder [mailto:gschroeder@comcast.net]
Sent: Tuesday, September 04, 2007 2:53 PM
To: Early, Stephen; Bricklin@autox.team.net
Subject: Re: To much pedal for Brakes
>I have checked the rear brakes adjustment. I have not looked at the
front.
> I will try to do that next. There was plenty of fluid coming through
when
> bleeing the lines so I do not believe there is an issue of a kink or
> blockage. I plan on bleeding the system again just in case.
>
> The electrical connection on top of the proportion valve. Should that
be
> removed when bleeding the brakes as well as pulling the pin?
>
> Greg 0036
|