Hi all, I started paint prep on 2082 and found that on the top of the doors
the under most layer is a dark charcoal grey color material. I checked the
outer edge of the body panels and found about a 1//32 inch layer of acrylic
and about an 1/8 inch layer of fiberglass which is not dark grey in color.
Are the door skins different from body panels???? I'm just trying to
figure out how much material i need to remove to prevent all the body problems
to come thru after a paint job. I can't tell you what type of paint was used.
It had a brown primer almost like red oxide primer and the paint, in areas is
solid spider web. The paint almost looks like a latex house paint in spots
like its caked on. I first da'ed with 80grit and that removed it slowly,
then I tried a light sandblasting and that took it down too. let me know, I
guess I'll try da'ing a body panel and see what happens there. thanks Frank
|