bricklin
[Top] [All Lists]

Re: Interior Paint

To: <Maycinc@cs.com>, <Bricklin@autox.team.net>
Subject: Re: Interior Paint
From: "Sean Johnson" <seanjohnson@attbi.com>
Date: Wed, 30 Apr 2003 07:40:54 -0500
Marvin,

Some part of the code is flattener to make gloss into semi-gloss.  I think
it is the .34 271 but I'm not sure.
----- Original Message -----
From: <Maycinc@cs.com>
To: ""Sean Johnson"" <seanjohnson@attbi.com>; <Bricklin@autox.team.net>
Cc: ""High Tech Coatings"" <Htc@MNSi.Net>
Sent: Tuesday, April 29, 2003 9:23 AM
Subject: Re: Interior Paint


> Sean,
> I took this to the local paint supplier and the part of the code they said
was meaningfull was the 5J.  However, they said it was a gloss paint.  I
understand that the doors are supposed to be flat or semi-gloss.  I think it
would be a great help to the club if someone could take an origial piece in
and get an exact formulation in either Dupont or PPG.
> Does anyone know what Terry or Bob use?
> Marvin
> #1343
>
> "Sean Johnson" <seanjohnson@attbi.com> wrote:
>
> > I ran into the same problem last fall.  What I was told was that the
> >lacquer
> > base is no longer available because it had a high volatile organic
content
> > (VOC) and was banned by the same legislation that outlawed Freon R12.  I
> > worked with the local Sherwin Williams automotive paint department to
get a
> > new formulation made.  Here are the specifics:
> >
> > It is the 72 - 76 Ford Medium Ginger Bronze
> >
> > F11N 3195 00(Y), code 5J, .66PT, .34 271.
> >
> > This was a 1 pint can and it cost about $40 USD.  I don't know that all
of
> > the codes mean but I've included everything written on the can.
> >
> > Good luck!
> >
> >----- Original Message -----
> >From: "High Tech Coatings" <Htc@MNSi.Net>
> >To: <maycinc@cs.com>
> >Cc: "bl" <bricklin@autox.team.net>
> >Sent: Thursday, April 24, 2003 2:35 PM
> >Subject: Re: Interior Paint
> >
> >
> >> Subject: Interior Paint
> >> from what I've read, The interior color - Phoenix Brown or Ginger
crosses
> >to
> >> a 71 GM Dark Sandle Wood
> >>
> >> > Does anyone have a code or formulation for the interior paint that is
> >NOT
> >> RM?  I have the RM code but can't find anyplace that can cross
reference
> >it.
> >> I also have the RM formulation but was told the tints aren't available
> >> anymore.
> >> > Marvin
> >> > #1343

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/bricklin


<Prev in Thread] Current Thread [Next in Thread>