bricklin
[Top] [All Lists]

Re: Ice in air door system

To: "Alan Coleman" <colemaal@hotmail.com>, <sbunin@provide.net>,
Subject: Re: Ice in air door system
From: "George Schiro" <gschiro@lni.net>
Date: Tue, 19 Dec 2000 11:44:37 -0500
I would have thought that installing an air dryer and lubricator would be
the best solution year round.

George Schiro

----------
> From: Alan Coleman <colemaal@hotmail.com>
> To: sbunin@provide.net; Bricklin@autox.team.net
> Subject: Re: Ice in air door system
> Date: Tuesday, December 19, 2000 10:22 AM
> 
> Seth,
> 
> The recommendation from the manufacturer was not to use anti freeze all
year 
> round, just in the winter!
> 
> I have used anti freeze in the lubricator, just in the 3 months of winter

> that we get here in MD. In March I dump it, then switch back to light
oil. I 
> have been doing this since I first put the air system on (75 or 76) and 
> discovered that the moisture would freeze in the system stopping the 
> operation of the doors. I haven't had any problems and I have never had
to 
> rebuild, tear apart,  or replace anything on the system (except when I
went 
> to an electric compressor in 78)!!!!!
> 
> I doubt that 3 months per year of exposure to anti freeze followed by oil
in 
> the system would be enough to cause harm. In addition to being
inconvenient 
> and very embarrassing, having a door system that does not function
properly 
> in winter can result in damage- like a broken window - which is a bit
more 
> expensive and inconvenient than a solenoid operated valve.
> 
> Alan Coleman
> #246 original owner
> 
> 
> 
> >Antifreeze is a BAD idea to put in your air door system!!!!! The air
rams
> >are aluminum, and antifreeze works real well with aluminum to rust!!! If

> >any
> >of you have every had problems with your doors and had to pull the 
> >solenoids
> >apart because chunks of white rust (aluminum corrosion) held your
release
> >valve open, it was probably because you were using antifreeze as your 
> >lubricant.
> >
> >Seth
> >#1544
> >
> >
> _________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>