John,
Here's some of the answers:
<< If anyone has the inner panel off their doors, and possibly the skin off,
I sure would appreciate it if you could check all the screws and bolt sized
for me. What I need inparticular is the info on the following screws/bolts:
1. Inner door handle to door mount,
>>> not sure, but I think #8 or #10 machine screws.
2. Bellcrank (from door handle) to door,
>>> not sure, but I think #8 or #10 machine screws.
3. The front chanel that mounts at a 30deg. angle or so to the door panel.
(I've been told this is unique to the 75s only.)
>>> #8 x 1/2 in. pan head sheet metal screws on top, 1/4 x 1 in. bolt on
bottom.
4. The outer door latch to the inner door latch on the bottom of the door
frame.
>>> #20 x 1-1/4 in. flat head machine screws.
5. Window frame to the door tabs.
>>> #8 x 1/2 in. flat head sheet metal screws. Make sure you use flat head or
the window will rub the heads.
6. The "L" bracket at the bottom rear of the window frame.
>>> #8 x 1/2 in. pan head sheet metal screws.
In some of my holes, the #8's were too small so I had to use #10.
Marvin
#1343
|