Vinny: the first thing to check is for battery power. If there is not enough
power in the battery the solenoids will not open and allow the air into the
cylinders. If you have enough battery check for power at the switches and
solenoids and fix any electrical gremlins. next you should check that the
door latches are releasing by trying to lift the door while the switch is
pressed, then fix these electrical gremlins. Once all these systems are
working and the doors still don't activate then it is in the air cylinders
or delivery system(solenoids).
----- Original Message -----
From: <VJCapece4@cs.com>
To: <bricklin@autox.team.net>
Sent: Saturday, July 15, 2000 8:38 AM
Subject: (no subject)
> I have the air door system that was installed by Terry Tanner. I have not
> started my Brick in 4 years and will do this week. When I filled the air
tank
> I got no response from the doors. I am sure I have to do some maintenance,
> any suggestions where I should start. Thanks for any help you can provide.
>
> Vinny
> 504
>
|