1CFM @ 90PSI requires 1/3HP. This will set you back ~$500 + tax / del. To
get even 175PSI will require a two stage compressor, and AFAIK, none are
available in 12VDC.
I believe the compressor most talked about is the Thomas 405ADC38/12 1/10HP
(.35CFM / 80PSI, 100PSI max) sold by Grainger's (5Z349) for ~$160.
GM
----- Original Message -----
>
> However, the problem is my onboard compressor Is not capable of filling
> the tank to its capacity. So it needs to be replaced. I want to replace
> it with a compressor that has a max. pressure of 200 psi and at least
> 1.0 cubic feet per minute flow rate @ 90 PSI.
>
> I looked online for about an hour or so yesterday, but had no luck
> finding the type of compressor I want. So what compressors is anyone
> else using? Who makes them and Where did you buy them?
> Thanks
>
|