I talked with Tanner about this and he said that you don't really need
one and I agree. If you do the coffee can thing, it might work it it
can withstand 20 inches of vacuum. While we're thinking, how about an
old propane cylinder? Just make sure that it is empty and be careful
drilling holes into it. Well, now that I think about it, perhaps only a
certified mechanic should do this job. Or maybe a certified Starbucks
employee, huh?
On the other hand, it would be easy to rig up the torch part to sub in
as a vacuum nipple, hmmm, not hard at all. And then the vacuum tank
would have a valve on it. An old friend used to have a 64 3 duece 389
goat that kept vacuum all night long, but that is another story. Kim
>Alan,
>
>Well, I have actually thinking about this a little bit, cause sooner or
>later (most likely later) I'm going to need one.
>
>Why not use a coffee can - Pop a hole in the can, empty it out, plug
the
>hole and you have vac. cannister.
>
>dave farbacher
>
>
>-----Original Message-----
>From: Alan Coleman <colemaal@hotmail.com>
>To: bricklin@autox.team.net <bricklin@autox.team.net>
>Date: Thursday, October 08, 1998 1:52 PM
>Subject: Vacuum Cannister for headlight system
>
>
>>Has anyone replaced the vacuum cannister for the headlight system (the
>>one
>>that looks like a coffee can)? What did you use? Mine has rusted out
>>and I see that BPS does not have this part listed.
>>Thanks,
>>Alan Coleman #246
>>
>>
>
>
|