The majority of machines will do the conversion if the the tech
knows how, but 1/8" = ~.26deg total or .13deg/side. Actually, if the
machine is accurate to 3 decimal places, then .125 deg/side or
.25deg total. I also recommend -.5 deg camber, +2.5 deg caster.
GM
-----Original Message-----
>
>Here's an alignment question:
>
>The latest specs I find for front end alignment show the Toe-in as
>"1/8". My alignment shop asks "1/8 of what?" He said toe-in is set
in
>degrees and it would be better if the toe-in were expressed in
exact
>degrees, or like "1/8 of 100 degrees", or something similar. Does
anyone
>know what the specs in degrees are?
|