--===============0835292115==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
Could be as simple as a loose wire at the dimmer switch.
Bill
-----Original Message-----
From: bmcu-bounces@autox.team.net [mailto:bmcu-bounces@autox.team.net] On
Behalf Of mailnpgcable.com
Sent: Sunday, November 25, 2007 2:57 PM
To: layne taggart; Bmcu@autox.team.net
Subject: Re: [Bmcu] (no subject)
Low beams are either out or circuit to them is out Can you try putting 12V
right to the back of the low beam plug?
Or checking with a meter if you are getting Volts to the end of the Low Beam
Plug Disclaimer
I would check mine like that if I had one
But that may not be the best idea
Gordon
Bullhead City
PS Still looking for an affortable MG MG Midget, Sprite
----- Original Message -----
From: "layne taggart" <layne.t@hotmail.com>
To: <Bmcu@autox.team.net>
Sent: Sunday, November 25, 2007 12:06 PM
Subject: [Bmcu] (no subject)
> Good afternoon. I hope everyone had a nice Thanksgiving. Does anybody
> know
> why I would have no low beam on my headlights, but when the foot switch is
> depressed, the hi beams come on? Ned to get this fixed before it will
> pass
> inspection . Help!!!!! Thanks, Layne, '66MGB
> _______________________________________________
> Bmcu mailing list
> Bmcu@autox.team.net
> http://autox.team.net/mailman/listinfo/bmcu
_______________________________________________
Bmcu mailing list
Bmcu@autox.team.net
http://autox.team.net/mailman/listinfo/bmcu
No virus found in this incoming message.
Version: 7.5.503 / Virus Database: 269.16.7/1151 - Release Date: 11/25/2007
4:24 PM
Version: 7.5.503 / Virus Database: 269.16.7/1151 - Release Date: 11/25/2007
4:24 PM
--===============0835292115==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Bmcu mailing list
Bmcu@autox.team.net
http://autox.team.net/mailman/listinfo/bmcu
--===============0835292115==--
|