----- Original Message -----
From: "James Creasy" <black94pgt@pacbell.net>
To: "John J. Stimson-III" <john@idsfa.net>; <Smokerbros@aol.com>
Cc: <ba-autox@autox.team.net>
Sent: Saturday, July 07, 2001 7:52 AM
Subject: Re: Stock Classes (was: Cheap Gas)
> on my rx7, i put on a stiffer front bar to DECREASE understeer!
Of course it should be pointed out that this works mostly on cars with
MacPherson struts (which James' old RX7 has). That's because with struts,
decreasing body roll also decreases the camber gain associated with it, and
struts are lousy at controlling camber.
This is why us guys with double-wishbone (or unequal-length control arm, if
you prefer) suspensions can get away with relatively less static camber.
Scot
----------------------------------------------------------------
You're three times more likely to wind up in court than in a hospital.
Shouldn't you be protected?
http://www.prepaidlegal.com/go/szediker
|