On Apr 6, 2006, at 6:03 AM, Paul Andrews wrote:
> Phil, I'd start the day with 38F/34R, and adjust from there. You
> might
> need more up front to counter rollover. You might need less out
> back to
> fine-tune the oversteer.
Thanks. And thanks also to the other responders to my question. If
anyone else has used Azenis, I'd like to here from you, too.
> You're running my FM front swaybar,
And thanks again. Yes, folks, I was so sure that I was going to buy
a 94-97 Miata that I bought Paul's bar before I bought the Miata!
> which
> really helps take out oversteer. I ran CS with pressures slightly
> lower, but I was on Kumho Victoracers.
The Azenis tires may not be as stiff as the Victos, but they won't be
as sticky, either, so the total forces for body roll and tire roll
will be less.
I assume that, unlike the old BFG R1, you can chalk these.
> Paul Andrews
> # 42 STX2 Really Blue Miata
Phil Ethier West Side Saint Paul Minnesota USA
1962 TR4 CT2846L, 1992 Saturn SL2, 1993 Suburban, 1994 Miata C package
pethier@isd.net
http://forum.mnautox.com/forums/
http://www.flickr.com/photos/pethier
|