> The 19mm lug nuts will fit, the problem is getting a wrench in there without
> scratching the rims. They should have also shipped a 19mm-17mm thin-walled
> adapter so you can use the stock tool kit.
I had no problem putting the 19 mm nut on, by the way. The Kosei doesn't
have any walls around the holes to need a thin walled adapter. You can get
a close look at the Kosei at the link below, it's big, so watch out modem
users.
<http://www.tirerack.com/images/wheels/kosei/swap/kos_k1_race_w_1000.jpg>
> Also, you should be able to use the 17mm nuts with your other rims (including
> the donut spare) without a problem.
Unfortunately, not safely. The stock lugs are acorn shaped. Typical for a
Honda, but the rest of the world generally uses a 60 degree tapered shaped
lug.
-A.
> From: "Baysinger, Jeffrey S (Jeffrey)" <jbaysinger@avaya.com>
> Date: Thu, 10 Apr 2003 09:39:13 -0600
> To: "Andrew Schmiechen" <aschmiechen@discovercolor.com>, "team.net"
> <autox@autox.team.net>
> Subject: RE: Kosei K1 Lugs/Tire Rack
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Partial archives at http://www.team.net/archive
|
