autox
[Top] [All Lists]

Re: Fw: What's legal when getting a valve job & milled head?

To: schenker@mediaone.net, autox@autox.team.net
Subject: Re: Fw: What's legal when getting a valve job & milled head?
From: SOLOMIATA@aol.com
Date: Fri, 17 Aug 2001 21:01:23 EDT
Just checked my brown 99 shop manual and there is absolutely no reference to 
a shave limit.  The 94-97 shop manual says .004" and the 90-93 1.6 shop 
manual says .008" (odd since they have the same 134mm head height and they 
are basically the same design head).  

I do know that there are 3 or 4 shop manual suppliments that I don't have so 
I recommend going to the dealer and asking to see theirs. 

Wiring supplement:  
http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=593651684&;
r=0&t=0

Transmission supplement 
http://cgi.ebay.com/ebaymotors/aw-cgi/ebayISAPI.dll?ViewItem&item=593651631&;
r=0&t=0




Randy

///          autox@autox.team.net mailing list
///
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe autox
///


<Prev in Thread] Current Thread [Next in Thread>