It's not really under the interior. It's inside the
frame. So you have to remove the wheel,
and remove the top of the shock. It sounds
worse than it was. It is not that hard, but you
are not going to do it between runs.
When I had a C4, I ran the rears about 1/2 stiff
as I remember.
Chris Teague
----- Original Message -----
From: "Mike Smith" <msmith2@columbus.rr.com>
To: "Team.net Autocross List" <autox@autox.team.net>
Sent: Wednesday, March 21, 2001 3:59 PM
Subject: C4 Corvette people
> I'm posting this for a friend who is newly one of the C4 Corvette racers
out
> there....
>
> He recently put Koni's on it (SA), and was wondering what y'all in SS did
to
> easily adjust the rear shocks, which I believe are under interior panels
> and/or carpet. I figure the more persnickity people out there don't like
the
> idea of cutting holes in the interior panels so the adjuster fits through.
>
> He also asked what were they commonly set to. (I realize there more to it
> than that, but.. hey, he's new....)
>
> I don't know, I don't even HAVE an interior... <grin>
>
> Thanks all,
>
> Mike
> CP 58
|