I'm thinking the same thing for my Probe GT. I don't have a limited slip,
so front wheel traction coming off tight corners is problematic since the
25mm stock sway bar wants to pull the inside wheel off the ground.
I'm using a 22mm rear bar (stock is 12mm) with Intrax springs, Tokicos on
3f, 5r; so my handling balance is where I like it. I just wonder what
putting the smaller front sway bar from the 626 would do.. I might have to
adjust the Tokicos to 4 or 5 on the front so it doesn't oversteer like
crazy.
I just wonder how a smaller bar and stiffer damping would treat things. It
would be nice if my struts were adjustable for compression and rebound.
Brian
--
Brian Berryhill
http://www.angelfire.com/ms/brianberryhill/
----- Original Message -----
From: "Moore, John" <jmoore@spyglass.com>
To: <autox@autox.team.net>
Sent: Monday, July 17, 2000 12:49 PM
Subject: Smaller front bar for an SE-R?
> Does anyone out there know of a SMALLER that stock front anti-sway
> bar for a 91 Sentra SE-R? I want to experiment with running a smaller
front
> bar since all indications are that it will help remove some of the pushing
> problems I have been having. The car runs in STS and it already has a
|