Re: DIY Tire Shaving?

[washburn <washburn@dwave.net>]

Rick Cone wrote:
> 
> DIY Tire Shaving. (MR2 Specific)
> 
> Step 1. Attach chain from bumper to large solid object.
> Step 2. Mount tire 1 to the RR.
> Step 3. Start Car
> Step 4. Rev the engine to readline and dump the clutch in first gear.
> Step 5. Wait 3 Minutes.
> Step 6. Dismount Tire 1, mount tires 2-4 respevtively, go to step 4
> 
A happy coincidence is that they are also heat cycled at the same time! 
:)

Pat