autox
[Top] [All Lists]

Re: Tire width for an Integra

To: autox@autox.team.net, jigou@dmreg.infi.net
Subject: Re: Tire width for an Integra
From: "Tim Malzahn" <tmalzahn@tnmnetworks.com>
Date: Thu, 23 Sep 1999 22:17:15 -0500
Jarrod,

I have a '97 GS-R sedan and am currently running 225-50 Kumho's up front with 
an old set of 205-50 R1's in back. I am also running 3mm spacers up front.

I DO NOT recommend running 225's on a non Type-R Integra. You can make the tire 
rub less on the inner fender by using spacers, but the springs are just too 
soft and allow the chassis to dive/lean. I can drive the car hard enough where 
the front tires hit a seam at the top of the front inner fender. I actually 
have a groove down the middle of the tires.

I will definitely be going back to 205's for next season.

Tim Malzahn
97 Integra GS-R Sedan

>>> Jarrod Igou <jigou@dmreg.infi.net> 09/23/99 11:20AM >>>
For the Integra folks out there:

How wide can I go with tires on my bone-stock 99 Integra GS-R?

Stock is 195/55/15 -- I'm sure 205/50/15s won't cause a problem, aside from 
a slight diameter difference.

Anyone ever squeeze 225/50s on the stock rims? I'd guess a problem may show 
up at that width--the rims are only 6" wide, after all, and the rest of the 
car probably starts to come into play at that width, too. (Silly things 
like suspension and fenders.....)

Thanks!

Jarrod
jigou@dmreg.infi.net 
Des Moines


<Prev in Thread] Current Thread [Next in Thread>