Ive had the same problems- different carbs BUT fuel pressure to high- very
much worth checking as is float level on level ground or concrete floor etc.
TtT
--- On Sun, 6/6/10, Mary and Ron Tebo <mrtebo@shaw.ca> wrote:
From: Mary and Ron Tebo <mrtebo@shaw.ca>
Subject: Re: [Alpines] Zenith carb gaskets
To: "William Lewis" <william.lewis@ucdmc.ucdavis.edu>
Cc: "alpines" <alpines@autox.team.net>
Date: Sunday, June 6, 2010, 10:24 AM
Bill:
Are you sure your float level is not too high? Also, do you have correct
floats and correct fuel pressure?
William Lewis wrote:
> Phil
> I have always had trouble with my Zeniths leaking around the top. I
have used the gaskets from rebuild kits from Sunbeam Specialties, made my own
gaskets from gasket material, coated them with shellac, etc, etc. If anyone
knows of a way to stop them from oozing, please let me know.
> Bill Lewis
> FrankenSeries II
> _______________________________________________
> Alpines@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $17.25
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/mrtebo@shaw.ca
_______________________________________________
Alpines@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $17.25
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/achd73@yahoo.com
_______________________________________________
Alpines@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $17.25
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|