Yes I have seen a picture of Roberts intake and it is the same as the one
on my car. Jim E
-----Original Message-----
From: owner-alpines@autox.team.net
[mailto:owner-alpines@autox.team.net]On Behalf Of Bill Blue
Sent: Thursday, July 31, 2003 7:33 PM
To: Paul Heuer; Mailing List Alpines
Subject: Re: manifold
This sounds like the mainfold that Jim Ellis has on his 1725 running twin
Webers.
Bill
----- Original Message -----
From: "Paul Heuer" <pheuer@earthlink.net>
To: "Mailing List Alpines" <alpines@autox.team.net>
Sent: Thursday, July 31, 2003 2:21 PM
Subject: Re: manifold
> It may be an Aussie production? We had 'Warneford' aftermarket bits,
> but I'm not sure if they were locally made. Is the angle right for the
> Alpine, or is it angled for a Hunter? There were lots of Hunter Hot-up
> bits around in Australia years ago.
>
> ------------------------------
>
> Date: Tue, 29 Jul 2003 19:47:29 -0700
> From: Jarrid Gross <jarrid_gross@earthlink.net>
> Subject: Re: manifold
>
> Robert J.Jaarsma wrote:
> >
> > I have a SIV with a manifold named "Warneford". It has four straight
> > ports and the linkage appears it had at least two carburetors. However
> > the carbs were gone.
> > Can anybody enlighten me what I really have?
> > Thanks Robert Jaarsma
>
> Sounds like another dual side draught weber intake.
>
> It has 4 ports on both sides of the manifold right?
>
>
> Jarrid Gross
>
> ------------------------------
|