In the past when I've made door panels I've used what's called 'tempered
masoninte', which is more weather-proof and resistant to warping and
delamination (common masonite problems). After cutting it to size, drilling
all the holes, and trial fitting, I then varnish it with polyurethane before
installing the padding and fabric. And I *never* use staples - they rust
rapidly - I only use contact adhesive (3M solvent based). Works great, lasts
forever!
-Kevin McLemore
----Original Message Follows----
From: "Chuck Nicodemus" <armorseal@spiretech.com>
Reply-To: "Chuck Nicodemus" <armorseal@spiretech.com>
To: "'mike proper'" <affiliatedleasing@sbcglobal.net>, "'Alpines'"
<alpines@autox.team.net>
Subject: RE: door panels
Date: Wed, 23 Jul 2003 15:44:29 -0700
Mike, you have a good idea. I would (snicker ) wood >>> try perhaps a
little more sturdy item such as a masonite . It is hard and cuts great.
And if you use a real good stapler it will hold longer in time. The
staples in the Luan will go in good, but after about 4-5 years will
start loosening up with the vibration. Luan will draw moisture too. That
will start rust at the staples.
Just a thought.
Chuck
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
|