Dan:
Larry has given you the correct advice. For further info on how bead
blasting can destroy a machined surface, go to
http://www.virtualindian.org/2techclean.htm
This is referring to mc parts but the principle is the same. Go to your
local abrasive supply store, and you can buy much less aggressive media
such as ground nutshells or corn cobs.
Ron Tebo
Dan Eiland wrote:
>
> Hi Listers,
>
> I was getting ready to glass bead some fiberglass parts in my blast cabinet
> and was wondering if this process will harm the parts in any way? Are there
> any parts on a car that should not be glass beaded? I have been cleaning
> some of my smaller parts this way with excellent results. But, got to
> thinking about fiberglass or for that matter parts such as Brake parts where
> contamination may be of concern. Any assistance is always appreciated.
>
> Thanks,
> Dan Eiland
|