John,
I had this happen and it was fouled plugs. I would screw a new set of
plugs in it. Jim
jstanco@jstanco.com wrote:
>How can I test to see if a coil is working? I believe it is the culprit for
>no spark to my plugs. I have a series II with stock distributor, coil and
>points. I have upgraded to an alternator. I tested to see if I had power to
>the coil. I removed one plug and check for spark and there was none. The
>car ran fine up until one time I flooded the car and could not start it since
>then.
>
>
>
>Thanks,
>
>
>
>John
>
>.
|