Tim, there's only one filler hole and that's the one on the gearbox side
which is the level if the car is level.
You need 4.8 US Pints or 2.27 litres.
Draining , you need to undo both the gearbox bung and the non-aligned one of
the three on the OD unit.
If you have a rebuilt/new box I'd suggest you plan on a drain, OD filter
clean and refill before too many miles come up.
Peter
----- Original Message -----
From: "Tim Stiffy" <tstiffy@pulsenet.com>
To: <alpines@autox.team.net>
Sent: Wednesday, June 12, 2002 4:07 PM
Subject: Transmission oil
> Is everyone ready for this weeks "Dumb Question of the Week"? OK, here
goes.
>
> I'm ready to install my new transmission. FINALLY! After I install it,
I'll
> fill it with 30W non-detergent oil. Here is my question....Do I fill the
> overdrive unit or does it share the transmission oil? If I do have to
fill
> the OD, where is the filling plug and how much does it take.
>
> Feel free to add any comments as to how dumb this guy must be ;-)
>
> Tim
> S1 Alpine
|