Just so you will know, the front valence on these two cars are different,
and if you plan on cutting off the mounts and welding them in place, and
using the series 5 oil cooler to "keep it fairly stock", you may need to
trim an inch from the rear edge of the valance. The series 5 is narrower to
give it some space. Lou
----- Original Message -----
From: "John Slade" <edalsj@igs.net>
To: "List, Alpine" <alpines@autox.team.net>
Sent: Sunday, February 24, 2002 5:39 PM
Subject: Series V Oil Cooler
> I am installing a Series V oil cooler in my S IV body, and I would like
> to know exactly how the long hose is fastened in the Series V, other
> than at the ends. The short hose I have has a clip on it which seems to
> fit under the horn mount bolt, and looks good in that location. The long
> hose also has a clip on it, but I have no idea where exactly it should
> locate.
>
> Could someone with an S V in suitable condition advise me on this. If a
> hole is required, could you advise exactly where it should be, and what
> the orientation of the clip is at that point? If a bracket is required,
> could you advise its shape and location?
>
> Many thanks
>
> John Slade
>
> PS...a digital pic would be really helpful!!
|