It used to be when a hinge was stuck, I would heat it up abit first. just hot
enough for you NOT to want to keep your finger on the part. The spray the heck
out of it with a breaker oil or liquid wrench. the heat acts as a draw, just
like trailer bearings in cold water it will suck the oil into the parts and work
about 99 % faster.. The reason boat trailer bearings go out is they warm up
while traveling, and when sumersed in water .......
cheers chuck
Louis & Laila wrote:
> If you can get inside the car, use that red tube that comes on a can of
> Liquid Wrench, and squirt them real good. Let it sit for a while, and squirt
> it some more. Then, work the door back and forth as much as you can and
> squirt it again. Try this until you can open the door the whole way. Thit is
> a process I have used and it worked. Lou
> ----- Original Message -----
|