besides the dist. , are your lifters out? if not,my bet is one is stuck on the
downsides....let us know.
Frank
Sent from my ASUS Pad
Lee Daniels via 6pack <6pack@autox.team.net> wrote:
>I have an old TR6 block in unknown condition but no visible damage or cracks.
>I think it's from a '73. Mostly stripped down but head still attached and
>pistons/rods in place. Crank and essentially everything else removed. Valves
>are still in place (since head is on) but rockers/pushrods removed. I've got
>it upside-down on an engine stand, and thought I'd just pull the camshaft out.
>It moves out about 1/4", then hits a hard stop - what's it hitting? It spins
>freely and moves in and out freely until it hits the stop.
>
>thanks
> Lee
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>Suggested annual donation $12.96
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>
>6pack@autox.team.net
>http://autox.team.net/mailman/listinfo/6pack
>
>Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/6packer@bex.net
>
_______________________________________________
Archive: http://www.team.net/archive
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
|