Hi Dave,
When I put a quick steering rack in I couldn't get an adequate gap
between the rack and the harmonic balancer because the QR I bought is
a bit thicker in the middle section than the stock. The list
suggested my motor mounts might be tired so I got TRF's premium motor
mounts and will try again this winter to install the QR after I do new
motor mounts.
Hopefully you won't encounter that but have hope there's a potential
solution if you do and you might not be installing it twice like me.
Bud Rolofson
71TR6 CC57365 (Good 6)
66TR4A CTC57806 (The Wreck-Almost parts)
66TR4A CTC57529 (The Project)
71F-250 Camper Special (Triumph Support Vehicle)
Z-50A Hardly Davidson 1977 Honda Mini-Trail Bike (Triumph Pit Bike)
levilevi@comcast.net
On Nov 25, 2011, at 12:25 AM, Cregg Cowan wrote:
> Hi Dave,
>
> The only thing I'll add to Dick Taylor's reply is to double check
> that the adjustment nut / plug is tight, and to put a witness mark
> on it so you can ensure it isn't working loose. I lost the nut on
> mine, but fortunately a friend who is a machinist was able to make a
> replacement.
>
> I find the QR rack is fine for normal driving (not twitchy) and
> great for autoX. However, I am glad that I don't need to do much
> parallel parking.
>
> Good Luck
> Cregg
>
> ________________________________________
>
> 6pack@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/6pack/levilevi@comcast.net
________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|