Hi Robert,
First of all check the wattage of all the bulbs and make sure they are they
same.
Second, check that you are using the proper turn signal flasher unit and NOT a
4-way flasher unit. The latter will work, but you'll never know if a bulb has
gone, as they are plumbed differently inside. With the proper unit, the turn
signal will stop flashing and stay on when a bulb fails.
Best regards,
David.
Sent from my iPhone
On Jul 17, 2011, at 5:29 PM, "Robert Liam Gannon" <trsix74@comcast.net>
wrote:
> Issue: One side flashes faster than the other. I have checked all the
bulbs.
> Checked all the grounds. Cleaned all the bulb holders and connectors. Is
it
> the flasher unit itself? At this point I am baffled. Any help would be
> appreciated.
>
>
>
> Robert L. Gannon
>
> http://home.comcast.net/~trsix74/site/?/home/
>
> ________________________________________
>
> 6pack@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/6pack/djfidler@rogers.com
________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|