Hi Tom,
You've jogged my memory. I was wrong about needles from the AH 3000
MkIII. Joe Curto was using the CV needles from earlier AH 6 cylinder models.
This was over 10 years ago, since then he may have found something he likes
better.
Hope I didn't lead anyone down the proverbial garden path.
Jim
----------------------------------------------------------------------
Message: 1
Date: Fri, 6 May 2011 16:06:38 -0400
From: "Tomislav Marincic" <tomislav.marincic@earthlink.net>
Subject: Re: [6pack] Su needles for TR6
To: Jgk423@aol.com, "6pack" <6pack@autox.team.net>
Message-ID: <380-2201155620638993@earthlink.net>
Content-Type: text/plain; charset="us-ascii"
Hello Jim,
Thanks for the note.
...The Healey needle for an early 2912cc 6-cylinder is CV, which is not
far from the TR4 needle. Your ZH is the leanest of the bunch, just slightly
leaner than the BAD for stock TR6's from Moss.
Cheers, Tom
************************************
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|