Bud:
I don't believe those are a good replacement. They need to be
specified as conical, since our wheels are steel rather than aluminum and
rely on a conical tip to center the wheel on the stud correctly. A better
choice would be
http://www.ezaccessory.com/Bullet_Mag_Lug_Nut_7_16_p/8232.htm at the site
mentioned below.
Although not the original style, they have the correct conical tip
to work with our steel wheels. A non-conical nut will not be safe.
If you are willing to toss the center trim piece, then conventional
chromed acorn nuts with conical tips will work.
If you want to retain the center trim piece with the TR6 logo, you
will need to go with a shanked nut, conical tip, 7/16" x 20 threads. Mag
wheel nuts are almost always non-conical and therefore not safe for use with
steel wheels. The only mag style nut that is conical (at least that I am
aware of) are the so called "bullet mag" nuts.
Vance
-----Original Message-----
From: 6pack-bounces@autox.team.net [mailto:6pack-bounces@autox.team.net] On
Behalf Of Bud Rolofson
Sent: Saturday, January 01, 2011 8:32 PM
To: Dave
Cc: 6pack@autox.team.net
Subject: Re: [6pack] lug nuts
NAPA #735-2552 Chrome Lug Nuts 7/16" R Short Mag
Try those. The set of four lug nuts to a blister pack includes 4
washers.
Bud Rolofson
<snip>
On Dec 18, 2010, at 10:16 PM, Dave wrote:
> hi, all.
>
> I'm thinking of replacing the chrome lug nuts (72 TR6 b stock wheels)
> with something a little less fragile. does anyone know the info I
> would need to order (size, thread, etc), and does anyone have a
> recommendation? I was referred to
> http://www.ezaccessory.com/Default.asp by someone. I'll try
> them on Monday unless there is a better place.
>
> thanks!
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|