John: This is from my cam regrinder. These are all the specs I have. He
reprofiled the cam from my 73. He said that re-grinding options are limited
on
the early carb cams (up to CF12500 I believe)
Duration
Valve Lobe Sep.
@.050 Adv Lift
Intake
225 280 .375 105
Exhaust 225 280 .375
By
"beast" I mean my cam cames on strongly at about 2800 rpm and seems to go as
high as I want to go. Great for fast road use. A 270 cam or the later stock
cam might be a better choice for the stop and go traffic many folks
encounter.
The idle on my cam is fine.
________________________________
From: John Cyganowski <janah@att.net>
To:
brucesimms2003@yahoo.ca
Sent: Thu, December 23, 2010 4:37:11 PM
Subject:
Bruce-
Can I get a copy of your spec sheet?
My engine folks are looking for
max lift centerline data, duration at 0.050"
etc.
In what way is it a beast?
John Cyg.
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|