I have an adjustable pushrod on my '76 TR6 that I got from BPNW when I
rebuilt my clutch hydrolics. But I understand that it doesnt make
much of a difference, as the slave on the TR6 is supposed to be self
adjusting.
I have never seen a TR3/4 rod, so not sure if they would be the
same... But if you are simply looking for a adjustable pushrod for a
TR6, BPNW has them.
- Aldwyn
Quoting Vsnively@aol.com:
> Listers,
>
> I understand that the clutch slave cylinder pushrod for TR3s and TR4s is
> adjustable. Would anyone know if this could directly replace the TR6
> non-adjustable unit ?
>
> Regards,
> Vic Snively
> '75 TR6 w/AC
> _______________________________________________
>
> 6pack@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/6pack/aldwyn@sylvancircle.org
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|