Steve-- Changing the rear springs is easy. After removing the wheels,
disconnect the rear shock (links) to allow the trailing arm to drop down. You
may have to then turn the rear hub a few deg. to let the u-joint drop lower
onto the frame. At this point the spring should be 'unloaded', and will pop out
by inserting a screwdriver between one of the top coils and the spring
crossmember.
When installing the new spring, you'll want to place the bottom into the
trailing arm first, then twist the spring into position at the top. Again, a
screwdriver can help coax it into place. I have neer had to use a spring
compressor to do this job, using both stock and the stiffer springs.
Dick
_______________________________________________
6pack@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|