If the pin itself is cracked, you probably need to replace the pin by
cutting an access panel in the rear deck to get at the top of the pin.
Here's how I fixed my cracked mounts.
http://tr6.danielsonfamily.org/DiffMounts.htm
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection,
Toyota 5 speed & Nissan LSD
http://tr6.danielsonfamily.org
--------------------------------------------------
From: "Bob Rochlin" <r_rochlin@hotmail.com>
Sent: Friday, February 26, 2010 2:21 PM
To: <6pack@autox.team.net>
Subject: [6pack] cracked differential mounts
> Hi Everyone, I discovered a bad differential mount on the right rear of my
> car and it looks like the differential mounting pin may have a hairline
> crack.
> I seem to remember that a lister did a pretty through description of
> repairing
> the diff mounts, but I was unable to find it in the archives. Can anyone
> steer me in the right direction and maybe suggest a repair strategy that
> doesn't involve more that removing the diff and doing some welding?
> Thanks.
> Bob Rochlin '72 TR6
> _________________________________________________________________
> Hotmail: Trusted email with Microsofts powerful SPAM protection.
> http://clk.atdmt.com/GBL/go/201469226/direct/01/
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> 6pack@autox.team.net
> http://autox.team.net/mailman/listinfo/6pack
>
> http://www.team.net/archive
>
> You are subscribed as 75tr6@tr6.danielsonfamily.org
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|