Ok Vance, your reply was way longer than mine and it did not get blocked.
What's up with that?
Lou
------Original Message------
From: Navarrette, Vance
Sender: 6pack-bounces@autox.team.net
To: Bruce Simms
To: TR-6 list
Sent: Jan 5, 2010 12:12 PM
Subject: Re: [6pack] 1) Leaking Brake MC 2) Brake pipe replacement.
Bruce:
I used a set of the cupro-nickel pipes, and they are very easy to work with.
They don't rust and are a good tradeoff between cost and durability.
You do not need a tool to bend the pipes. Just bend them by hand. You get
nicely radiused corners with no kinks. I tried using the pipe bending tool,
and the results were not as nice as simply bending them by hand. I used the
original pipe clips with good results.
One fitting was incorrectly sized on the new pipes, so I cut it off and
replaced it with the fitting from the original pipes. Also one pipe was a
touch on the long side, but some creative routing used the excess length and
made for a neat looking installation.
Vance
Vance Navarrette
Cogito Ergo Zoom
I think, therefore I go fast
-----Original Message-----
From: 6pack-bounces@autox.team.net [mailto:6pack-bounces@autox.team.net] On
Behalf Of Bruce Simms
Sent: Monday, January 04, 2010 8:42 PM
To: 6pack@autox.team.net
Subject: [6pack] 1) Leaking Brake MC 2) Brake pipe replacement.
<snip>
I have
a set of cuppro-nickel TR6 brake pipes all nicely rolled up in a bag from a
Scottish ebayer. they need to be bent, which I've never done, although I
have a pipe bending tool. that's supposed to be for these tasks. Taking the
old ones off and installing the new ones while on my back under a greasy oily
dirty car might not be a really pleasant job. Maybe I should have bought
the
pre-bent stainless pipes to make my life a little easier. I installed ss
brake hoses a few years ago, so I've a little expereince here.
<snip>
Thanks
a bunch for any advice or suggestions.
Bruce Simms
73 TR6
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as lfm614@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|