Take a short drive with the speedo cable disconnected from the speedo to see if
the inner cable is turning. If not, be sure that the square end goes up into
the drive at the tranny is seated. (You should feel it drop in, and the other
end of the cable then won't turn).
The end that goes into the speedo shouldn't be longer than 3/8 inch. I wrapped
the end of my cable tightly with masking tape and ground off the excess.
-----Original Message-----
From: oliver
Sent: Monday, June 22, 2009 4:39 PM
To: '6-Pack', triumphs@autox.team.net
Subject: [6pack] speedo failure
has anyone else experienced a speedo failure after installing a new cable from
moss? or was i just unlucky???
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as tr6taylor@webtv.net
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|