Bob,
I tried my 72 Delco pretty muich the same way and failed. Ended up buying a new
pulley with the Bosch upgrade. I guess they weld themselves together with age /
use.
The only things I can think of that you don't mention is lots of aero kroil and
let it sink in or heat to nut to see if you can break the lock.
Lou
72 Pimento TR6
------Original Message------
From: Bob
Sender: 6pack-bounces@autox.team.net
To: TR-6 list
Sent: Apr 12, 2009 11:08 AM
Subject: [6pack] Alternator fan nut
Hello,
I am trying to remove the pulley/fan from my 72 Alernator. It is a Delco/Remy
version.
The nut is a 15/16 around what looks like to be a 5/16 allen screw.
I put the pulley in a vice and the nut turns but does not loosen.
I then attached a 5/16 allen socket to the allen screw put that in a vice and
tried to turn the 15/16 nut with a very large box wrench and BFH.
The 15/16 nut does not move! I am afraid of breaking the allen socket if I get
a bigger hammer.
I am trying to turn the nut counter - clockwise. Is that correct?
Any other methods to remove that nut, bolt so the pulley / fan can be removed?
Thanks,
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
You are subscribed as lfm614@aol.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|