Stan:
The shuttle is behind that little hole. Fortunately it does not need to
be
moved very far. Insert a small screw driver into the hole and lever the
shuttle into the centered position. You will find that you can feel a small
depression in the shuttle, and when that depression is centered under the
hole, everything should work correctly.
Vance
Vance Navarrette
Cogito Ergo Zoom
I think, therefore I go fast
-----Original Message-----
From: 6pack-bounces@autox.team.net [mailto:6pack-bounces@autox.team.net] On
Behalf Of Foster, Stan (HP IT)
Sent: Monday, March 02, 2009 6:36 PM
To: 'TR6'
Subject: [6pack] PWDA question
This winter I rebuilt my front suspension and calipers so the front brake
system was drained. It is all back together now and I was noticing some odd
behavior when trying to bleed the front brakes. I recalled some traffic in
the
past about needing to re-center the shuttle in the PWDA so thinking that may
be a factor I removed the plastic switch part expecting to see a moveable
component beneath but what I see is a small hole that the brass prong on the
bottom of the plastic part fits into and no obvious part that could be moved.
What am I missing ?
Stan.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|