Mike and Dave,
I would suggest using the shorter albeit stiffer springs with the original
rubber bushings. This would give a softer ride than using the urethane or
nylatron bushings. Unless others know how to lower the 6 another method. One
could use the earlier rear springs on the later model and change the trailing
arm mounts to the earlier configuration to lower the rear. Triumph Tune has
standard springs front tt4001 390 lbs/in fitted length 6.65"and rear tt4212 420
lbs/in fitted length 8.65" and lowered springs front tt4201 420 lbs/in 6.5" and
rear tt4216 420 lbs/in 8.65" . just 2 cents worth, greg perry
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|