You could start with the vertical bolt and if that doesn't give you what you
need, slacken the clamp and rotate the dizzy body. In reality there isn't much
difference between the amount of work or tools required in either approach and
in general I would just slacken the clamp and rotate the dizzy as required.
Stan
-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com@autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com@autox.team.net] On Behalf Of jim
hearn
Sent: Saturday, July 05, 2008 1:49 PM
To: 'Sally or Dick Taylor'; '6-Pack ListServe'
Subject: Re: [6pack] How is the TR6 distributor actually moved
So, I hate to be slow on this but if my distributor is set pretty good
now and I just want enough movement to fine tune it, do I loosen the
vertical bolt or the horizontal clamp to get the limited movement?
Thanks
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|