No matter who inserts the cam bearings (you or the machine shop) it
never hurts to double check to ensure that the oil holes in the
bearings are properly aligned with the oil holes from the block. I
know of two people, one had a machine shop do the insertion, who
learned the hard way that this needs to be done.
Mike Lunsford, 1970 TR 6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|