Jim,
In my case I had one nut missing in the hardtop. My solution was to put a USS
square nut in the welded cage. The cage has one side not welded so that one
can lift/ bend the tab up to get the nut into the cage. Then close the tab
with the nut in the cage. I then use one USS and one SAE bolt to tighten down
the front of the top to the windshield.
Regards, Greg Perry
-----Original Message-----
>From: James Henningsen <trguy@cfl.rr.com>
>One of the nuts that is used to secure the hardtop to the top of the
>windscreen has come loose so the securing bolt spins freely. Anyone ever
>fixed one of these?
>Cheers,
>
>Jim Henningsen
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|