Hi Oliver,
Many body bolts should come out with little hassle. An air impact wrench is
a big help if available but not at all necessary. For those bolts that are
a bit stubborn apply a generous spray of penetrant then wait a day or so
before trying again. It seems that the spare tire hook, the rear fender
supports from the chassis and floor bolts are the most common problem areas
for rusted body bolts.
With the engine and tranny removed to lower the clearance and body properly
braced the body can be lifted off the chassis with two (and preferably
three) strong individuals.
Good luck!
Greg
CD6250L
----- Original Message -----
From: "Oliver" <sumton@sbcglobal.net>
> hi, all.
>
> i need to remove the body from the frame (69 TR6) to do some rust repair.
>
> i've been looking for instructions like on the Buckeye Triumphs site with
> no
> luck.
>
> any help would be appreciated. if there are no good articles, with your
> help i'll create one and post it.
>
> thanks.
> _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|